Zebra RW SERIES Specifikace stáhnout pdf (Strana 93)

• 2-93 • RMAN-RWS-001 rev. B • RW Series Repair Procedures

Installation Instructions

This kit includes the parts and documentation necessary to install the

following Replacement Kits in the RW 220 model printer.

Kit p/n Description

RK1794 9 - 011 Radio, 802.11b, ZLAN

RK17949- 012 Radio, 802.11b (Compact Flash)

RK17949- 013 Radio, Bluetooth Kit

RK17949- 015 Radio, 802.11g (non-card)

RK17949- 016 Radio, 802.11g (with card)

The installation procedure for all of these kits is substantially the same. Read

these instructions thoroughly before attempting to install any of these kits.

The operator must wear a properly grounded ESD strap to perform the following

repair procedure.

Reference Materials

UMAN-RWS RW Series Users’ Guide

Tools Required

#0 or #1 Phillips Head Screw Driver

Cautions

 Caution•Thisinstallationmustbeperformedonlybyaqualiedservicetechnician.

Unless otherwise specied:

• Always turn the printer off

• Remove the battery before installing any Replacement Kits.

• Remove media before installing this Replacement Kit.

Remove the Upper Housing

Refer to the procedure for repair kits RK17949-008 and -009 for more details on

removing the Keypad and Housing Assembly

1. Remove and retain the (6) screws securing the Keypad and Housing to the

printer.

2. Remove and retain the D-rings or the sleeves and carrying strap captured

between the Keypad and Housing and the lower housing.

3. Pivot the Keypad and Housing forward.

4. Unplug the Keypad and LCD ex cables from the CPU board.

continued on next page

RW 220 Radio Replacement Kits

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 113 114

Žádné komentáře

Zebra RW SERIES Specifikace Strana 93