Zebra RW SERIES Specifikace stáhnout pdf (Strana 40)

RMAN-RWS-001 rev. B • RW Series Repair Procedures • 2-40 •

Replacement Kit RK18241-1 RW 420 Card Reader

Installation Instructions

This kit includes the parts and documentation necessary to install the RK17393-

11 Card Reader Kit, RW 420 in the RW 420 model printer. Read these instructions

thoroughly before attempting to install this kit.

The operator must wear a properly grounded ESD strap to perform the following

repair procedure.

Reference Materials

UMAN-RWS RW Series Users’ Guide

Tools Required

#0 or #1 Phillips Head Screw Driver

Cautions

Thisinstallationmustbeperformedonlybyaqualiedservicetechnician.

Unless otherwise specied:

• Always turn the printer off

• Remove the battery before installing any Replacement Kits.

Remove the Upper Housing

Refer to procedure for RK17393-008 & RK18280-1 for more details on removing the

Keypad and Housing Assembly.

1. Remove and retain the (6) screws securing the Keypad and Housing to the

printer.

2. Remove and retain the D-rings or the sleeves and carrying strap captured

between the Keypad and Housing and the lower housing.

3. Pivot the Keypad and Housing forward. For ease of assembly, you may elect to

unplug the keypad and LCD ex cables from J7 and J9 on the CPU Board.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 113 114

Žádné komentáře

Zebra RW SERIES Specifikace Strana 40