Zebra RW SERIES Specifikace stáhnout pdf (Strana 89)

• 2-89 • RMAN-RWS-001 rev. B • RW Series Repair Procedures

Replacement Kit RK17949-010 - RW 220 Card Reader

Installation Instructions

This kit includes the parts and documentation necessary to install the RK17949-010

Card Reader Kit, RW 220 in the RW 220 model printer. Read these instructions

thoroughly before attempting to install this kit.

The operator must wear a properly grounded ESD strap to perform the following

repair procedure.

Reference Materials

UMAN-RWS RW Series Users’ Guide

Tools Required

#0 or #1 Phillips Head Screw Driver

Cautions

 Caution•Thisinstallationmustbeperformedonlybyaqualiedservicetechnician.

Unless otherwise specied:

• Always turn the printer off

• Remove the battery before installing any Replacement Kits.

• Remove media before installing this Replacement Kit.

Remove the Upper Housing

Refer to procedure for RK17949-008 & -009 for more details on removing the Keypad

and Housing Assembly.

1. Remove and retain the (6) screws securing the Keypad and Housing to the

printer.

2. Remove and retain the D-rings or the sleeves and carrying strap captured

between the Keypad and Housing and the lower housing.

3. Pivot the Keypad and Housing forward. For ease of assembly, you may elect to

unplug the keypad and LCD ex cables from J7 and J9 on the CPU Board.

continued on next page

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 113 114

Žádné komentáře

Zebra RW SERIES Specifikace Strana 89