Zebra TTPM3 Specifikace stáhnout pdf (Strana 13)

Installation

Installing a Desktop Printer

01/06/2009 TTPM3 Installation and Programming Manual P1003642-001

Installing a Desktop Printer

1. Connect the cable from the power supply to the connector at the back of the printer.

2. Connect the power supply to a line outlet with safety ground. The ground potential should

be the same as for the host computer. If ground potentials differ, use a short distance

modem between the computer and the printer.

3. Connect a serial cable between the COM port of the host computer and the serial input of

the TTPM3 printer. For pin assignment, see Communications Cable on page 98.

4. Turn on the printer. The blue and green indicators should light up.

5. Press the front button. The green indicator starts flashing and the yellow indicator lights

up, indicating “Out of Paper”.

6. Turn the tickets so that the magnetic stripe is on the left side facing downwards, as seen

from the front of the printer.

7. Insert tickets in the lower document entry. The printer feeds the tickets forward and cuts

and ejects one ticket.

The printer is ready for use.

Network Option

If the printer is equipped with a network card only network interface should be used.

1. Open the cover

2. Insert the network cable in the hole at the rear of the cover.

3. Connect the cable to the TCP/IP connector at the rear of the network card.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 111 112

Žádné komentáře

Zebra TTPM3 Specifikace Strana 13