Zebra II Specifikace stáhnout pdf (Strana 126)

^FD

Field Data

Description: The ^FD command defines the data string for the field. The field data

can be any printable character except those used as command prefixes (^ and ~).

Format: ^FDa

Parameters:

a = data to be printed

Accepted Values: any ASCII string up to 3072 characters.

Default Value: none – a string of characters must be entered.

Comments:

The ^ and ~ characters can be printed by changing the prefix characters – refer to the

~CC and ~CT commands. The new prefix characters cannot be printed.

Characters with codes above 127, or the ^ and ~ characters can be printed using the

^FH and ^FD commands.

For printing special functions, the following scheme is used:

\& = carriage return/line feed

\(*) = soft hyphen (word break with a dash)

\\ = backslash (\)

•

^CI13 must be selected in order to print a \.

•

If a soft hyphen is placed near the end of a line, the hyphen will be printed. If it is not

placed near the end of the line, it will be ignored.

ZPL II Programming Guide Volume One: Command Reference for X.10

118

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 261 262

Žádné komentáře

Zebra II Specifikace Strana 126