Zebra 105SL Plus Uživatelská příručka stáhnout pdf (Strana 165)

165

Specifications

Ribbon Specifications

7/3/13 P1056468-002

Black Mark Sensing

Ribbon Specifications

Refer to the following tables for ribbon specifications.

Media Specifications 203 dpi 300 dpi

Mark length (measuring parallel

to label/tag edge)

Minimum 0.12 in. (3 mm) 0.12 in. (3 mm)

Maximum 0.43 in. (11 mm) 0.43 in. (11 mm)

Mark width (measuring to

perpendicular

label/tag edge)

Minimum 0.43 in. (11 mm) 0.43 in. (11 mm)

Maximum Full media width Full media width

Mark location within 0.040 in. (1 mm) of

the inside media edge

within 0.040 in. (1 mm) of

the inside media edge

Mark density in Optical Density Unit (ODU) >1.0 >1.0

Note • Consider the following when using ribbon:

• Match the ribbon to the label width and printhead width that you are using. The ribbon

should be at least as wide as the labels to protect the printhead from excessive wear.

• Ribbon must be wound with the coated side out.

Ribbon Specifications 203 dpi 300 dpi

Printhead resolution 203 dots/inch

(8 dots/mm)

300 dots/inch

(12 dots/mm)

Ribbon width Minimum 0.79 in. (20 mm) 0.79 in. (20 mm)

Ribbon width Maximum 4.33 in. (110 mm) 4.33 in. (110 mm)

Maximum ribbon length 1476 ft (450 m) 1476 ft (450 m)

Ribbon core inside diameter 1.0 in. (25.4 mm) 1.0 in. (25.4 mm)

Maximum ribbon roll outside

diameter

3.2 in. (81.3 mm) 3.2 in. (81.3 mm)

1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 179 180

Žádné komentáře

Zebra 105SL Plus Uživatelská příručka Strana 165