Zebra 105SL Plus Uživatelská příručka Strana 100

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 130
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 99
76 105SL User Guide 6/4/2004 11342L Rev. 8
Routine Maintenance
Lubrication
Lubrication
Fuse Replacement
The printer uses a metric-style fuse (5 × 20 mm IEC) rated at F5A, 250V. The end caps of the
fuse must bear the certification mark of a known international safety organization (see
Figure 6 on page 12).
Depending on the model you have, the fuse may not be user-replaceable (see Figure 44) and
may need to be replaced by a qualified service technician. Refer to the Maintenance Manual
(part number 32056L) for details.
Figure 44 • Fuse Replacement
Caution • No lubricating agents other than Zebra-supplied, silicon-only lubricants should
be used on the spindle felt clutches of this printer. Other commercially available lubricants
damage the finish and mechanical parts.
Note • Models with a user-replaceable fuse have a warning label next to the fuse for easy
identification.
Zobrazit stránku 99
1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 129 130

Komentáře k této Příručce

Žádné komentáře