Zebra Z4M Uživatelský manuál stáhnout pdf (Strana 94)

RS-232 Interface

This printer is configured as Data Terminal Equipment (DTE). The serial data cable

used to connect the printer to the host computer will be one of two styles:

9-pin to 25-pin cable – (null modem cable) must have a 9-pin “D” type (DB-9S)

connector on the end that is plugged into the serial port at the computer and a

25-pin “D” type (DB-25P) connector on the other end that is plugged into the

connector at the rear of the printer. Figure 35 shows the required cable

connections.

25-pin to 25-pin cable – (null modem cable) must have a 25-pin “D” type (DB-25S)

connector on the end that is plugged into the serial port at the computer and a 25-pin

“D” type (DB-25P) connector on the other end that is plugged into the connector at

the rear of the printer. Figure 36 shows the required cable connections.

86 Zebra Z4M Printer User’s Guide

Figure 35

Figure 36

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 100 101 102

Žádné komentáře

Zebra Z4M Uživatelský manuál Strana 94